Agilent Technologies 5000 Series manual Aver Hres

2Commands Quick Reference

Table 27 :WAVeform Commands Summary (continued)

Command	Query	Options and Query Returns
:WAVeform:POINts	:WAVeform:POINts?	<# points> ::= {100 250 500
<# points> (see	(see page 413)	1000 <points_mode>} if waveform
page 413)		points mode is NORMal
		<# points> ::= {100 250 500
		1000 2000 ... 8000000 in 1-2-5
		sequence <points_mode>} if
		waveform points mode is MAXimum
		or RAW
		<points_mode> ::= {NORMal
		MAXimum RAW}
:WAVeform:POINts:MODE	:WAVeform:POINts:MODE	<points_mode> ::= {NORMal
<points_mode> (see	? (see page 415)	MAXimum RAW}
page 415)
n/a	:WAVeform:PREamble?	<preamble_block> ::= <format
	(see page 417)	NR1>, <type NR1>,<points
		NR1>,<count NR1>, <xincrement
		NR3>, <xorigin NR3>, <xreference
		NR1>,<yincrement NR3>, <yorigin
		NR3>, <yreference NR1>
		<format> ::= an integer in NR1
		format:
		• 0 for BYTE format
		• 1 for WORD format
		• 2 for ASCii format
		<type> ::= an integer in NR1
		format:
		• 0 for NORMal type
		• 1 for PEAK detect type
		• 2 for AVERage type
		• 3 for HRESolution type
		<count> ::= Average count, or 1
		if PEAK detect type or NORMal; an
		integer in NR1 format
:WAVeform:SOURce	:WAVeform:SOURce?	<source> ::= {CHANnel<n>
<source> (see	(see page 420)	FUNCtion MATH}
page 420)		<n> ::= 1-2 or 1-4 in NR1 format
:WAVeform:SOURce:SUBS	:WAVeform:SOURce:SUBS	<subsource> ::= {{NONE RX}
ource <subsource>	ource? (see page 424)	TX}
(see page 424)
n/a	:WAVeform:TYPE? (see	<return_mode> ::= {NORM PEAK
	page 425)	AVER HRES}

54 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference