Agilent Technologies 5000 Series manual MARKerX2Position, MARKerX1Position on, MEASureTSTOp on

3Commands by Subsystem

:MARKer:X2Position

	(see page 530)
Command Syntax	:MARKer:X2Position <position> [suffix]
	<position> ::= X2 cursor position in NR3 format
	<suffix> ::= {s ms us ns ps Hz kHz MHz}
	The :MARKer:X2Position command sets :MARKer:MODE to MANual, sets
	the X2 cursor position and moves the X2 cursor to the specified value.
Query Syntax	:MARKer:X2Position?
	The :MARKer:X2Position? query returns current X2 cursor position. If the
	front- panel cursors are off an error is returned. This is functionally
	equivalent to the obsolete :MEASure:TSTOp command/query.
Return Format	<position><NL>
	<position> ::= X2 cursor position in NR3 format
See Also	• "Introduction to :MARKer Commands" on page 204
	• ":MARKer:MODE" on page 205
	• ":MARKer:X1Position" on page 206
	• ":MARKer:X2Y2source" on page 209
	• ":MEASure:TSTOp" on page 485

208 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference