Agilent Technologies 5000 Series manual FUNCtionDISPlay, Introduction to FUNCtion Commands on

3Commands by Subsystem

:FUNCtion:DISPlay

	(see page 530)
Command Syntax	:FUNCtion:DISPlay <display>
	<display> ::= {{1 ON} {0 OFF}}
	The :FUNCtion:DISPlay command turns the display of the function on or
	off. When ON is selected, the function performs as specified using the
	other FUNCtion commands. When OFF is selected, function is neither
	calculated nor displayed.
Query Syntax	:FUNCtion:DISPlay?
	The :FUNCtion:DISPlay? query returns whether the function display is on
	or off.
Return Format	<display><NL>
	<display> ::= {1 0}
See Also	• "Introduction to :FUNCtion Commands" on page 182
	• ":VIEW" on page 122
	• ":BLANk" on page 94
	• ":STATus" on page 119

184 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference