Agilent Technologies 5000 Series manual TRIGgerTVPOLarity, TRIGgerTVSOURce on

3Commands by Subsystem

:TRIGger:TV:POLarity

	(see page 530)
Command Syntax	:TRIGger:TV:POLarity <polarity>
	<polarity> ::= {POSitive NEGative}
	The :TRIGger:TV:POLarity command sets the polarity for the TV trigger.
Query Syntax	:TRIGger:TV:POLarity?
	The :TRIGger:TV:POLarity? query returns the TV trigger polarity.
Return Format	<polarity><NL>
	<polarity> ::= {POS NEG}
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:MODE" on page 319
	• ":TRIGger:TV:SOURce" on page 385

384 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference