Agilent Technologies 5000 Series manual SAVEIMAGeFACTors, Command Syntax

Commands by Subsystem 3

:SAVE:IMAGe:FACTors

Command Syntax

N O T E

(see page 530)

:SAVE:IMAGe:FACTors <factors>

<factors> ::= {{OFF 0} {ON 1}}

The :SAVE:IMAGe:FACTors command controls whether the oscilloscope factors are output along with the image.

Factors are written to a separate file with the same path and base name but with the ".txt" extension.

Query Syntax	:SAVE:IMAGe:FACTors?
	The :SAVE:IMAGe:FACTors? query returns a flag indicating whether
	oscilloscope factors are output along with the image.
Return Format	<factors><NL>
	<factors> ::= {0 1}
See Also	• "Introduction to :SAVE Commands" on page 263
	• ":SAVE:IMAGe[:STARt]" on page 265
	• ":SAVE:IMAGe:AREA" on page 266
	• ":SAVE:IMAGe:FORMat" on page 268
	• ":SAVE:IMAGe:INKSaver" on page 269
	• ":SAVE:IMAGe:PALette" on page 270

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 267