Agilent Technologies 5000 Series manual WAVeformPREamble? Preambleblock = format

3Commands by Subsystem

Table 67 :WAVeform Commands Summary (continued)

Command	Query	Options and Query Returns
n/a	:WAVeform:PREamble?	<preamble_block> ::= <format
	(see page 417)	NR1>, <type NR1>,<points
		NR1>,<count NR1>, <xincrement
		NR3>, <xorigin NR3>, <xreference
		NR1>,<yincrement NR3>, <yorigin
		NR3>, <yreference NR1>
		<format> ::= an integer in NR1
		format:
		• 0 for BYTE format
		• 1 for WORD format
		• 2 for ASCii format
		<type> ::= an integer in NR1
		format:
		• 0 for NORMal type
		• 1 for PEAK detect type
		• 2 for AVERage type
		• 3 for HRESolution type
		<count> ::= Average count, or 1
		if PEAK detect type or NORMal; an
		integer in NR1 format
:WAVeform:SOURce	:WAVeform:SOURce?	<source> ::= {CHANnel<n>
<source> (see	(see page 420)	FUNCtion MATH}
page 420)		<n> ::= 1-2 or 1-4 in NR1 format
:WAVeform:SOURce:SUBS	:WAVeform:SOURce:SUBS	<subsource> ::= {{NONE RX}
ource <subsource>	ource? (see page 424)	TX}
(see page 424)
n/a	:WAVeform:TYPE? (see	<return_mode> ::= {NORM PEAK
	page 425)	AVER HRES}
:WAVeform:UNSigned	:WAVeform:UNSigned?	{0 1}
{{0 OFF} {1	(see page 426)
ON}} (see page 426)
:WAVeform:VIEW <view>	:WAVeform:VIEW? (see	<view> ::= {MAIN}
(see page 427)	page 427)
n/a	:WAVeform:XINCrement?	<return_value> ::= x-increment
	(see page 428)	in the current preamble in NR3
		format
n/a	:WAVeform:XORigin?	<return_value> ::= x-origin
	(see page 429)	value in the current preamble in
		NR3 format
n/a	:WAVeform:XREFerence?	<return_value> ::= 0
	(see page 430)	(x-reference value in the current
		preamble in NR1 format)

402 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference