Agilent Technologies 5000 Series manual MEASureVMAX

Commands by Subsystem 3

:MEASure:VMAX

(see page 530)

Command Syntax :MEASure:VMAX [<source>]

<source> ::= {CHANnel<n> FUNCtion MATH}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The :MEASure:VMAX command installs a screen measurement and starts a maximum vertical value measurement. If the optional source parameter is specified, the current source is modified.

Query Syntax :MEASure:VMAX? [<source>]

The :MEASure:VMAX? query measures and outputs the maximum vertical value present on the selected waveform.

Return Format <value><NL>

<value> ::= maximum vertical value of the selected waveform in NR3 format

See Also • "Introduction to :MEASure Commands" on page 218

•":MEASure:SOURce" on page 240

•":MEASure:VMIN" on page 250

•":MEASure:VPP" on page 251

•":MEASure:VTOP" on page 254

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 249