Agilent Technologies 5000 Series manual MEASureLOWer, Instead

5Obsolete and Discontinued Commands

:MEASure:LOWer

	(see page 530)
Command Syntax	:MEASure:LOWer <voltage>
	The :MEASure:LOWer command sets the lower measurement threshold
	value. This value and the UPPer value represent absolute values when the
	thresholds are ABSolute and percentage when the thresholds are PERCent
	as defined by the :MEASure:DEFine THResholds command.
	The :MEASure:LOWer command is obsolete and is provided for backward compatibility to
N O T E
	previous oscilloscopes. Use the :MEASure:DEFine THResholds command (see page 222)
	instead.
Query Syntax	:MEASure:LOWer?
	The :MEASure:LOWer? query returns the current lower threshold level.
Return Format	<voltage><NL>
	<voltage> ::= the user-defined lower threshold in volts in NR3 format
See Also	• "Introduction to :MEASure Commands" on page 218
	• ":MEASure:THResholds" on page 481
	• ":MEASure:UPPer" on page 488

478 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference