Agilent Technologies 5000 Series :MEASure:VSTOp

Obsolete and Discontinued Commands 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 491
:MEASure:VSTOp
(see page 530)
Command Syntax :MEASure:VSTOp <vstop_argument>
<vstop_argument> ::= value for Y2 cursor
The :MEASure:VSTOp command moves the vertical marker 2 (Y2 cursor) to
the specified value corresponding to the selected source. The source can
be selected by the MARKer:X2Y2source command.
Query Syntax :MEASure:VSTOp?
The :MEASure:VSTOp? query returns the current value of the Y2 cursor.
Return Format <value><NL>
<value> ::= value of the Y2 cursor in NR3 format
See Also •"Introduction to :MARKer Commands" on page 204
•"Introduction to :MEASure Commands" on page 218
•":MARKer:Y1Position" on page 211
•":MARKer:Y2Position" on page 212
•":MARKer:YDELta" on page 213
•":MARKer:X2Y2source" on page 209
•":MEASure:SOURce" on page 240
•":MEASure:TDELta" on page 480
•":MEASure:TSTArt" on page 484
NOTE The short form of this command, VSTO, does not follow the defined Long Form to Short
Form Truncation Rules (see page 532). The normal short form, VST, would be the same for
both VSTArt and VSTOp, so sending VST for the VSTOp command produces an error.
NOTE The :MEASure:VSTOp command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :MARKer:Y2Position command (see page 212) instead.