Agilent Technologies 5000 Series manual HARDcopyGRAYscale

Obsolete and Discontinued Commands 5

:HARDcopy:GRAYscale

Command Syntax

N O T E

(see page 530)

:HARDcopy:GRAYscale <gray>

<gray> ::= {{OFF 0} {ON 1}}

The :HARDcopy:GRAYscale command controls whether grayscaling is performed in the hardcopy dump.

The :HARDcopy:GRAYscale command is an obsolete command provided for compatibility to previous oscilloscopes. Use the :HARDcopy:PALette command (see page 200) instead. (":HARDcopy:GRAYscale ON" is the same as ":HARDcopy:PALette GRAYscale" and ":HARDcopy:GRAYscale OFF" is the same as ":HARDcopy:PALette COLor".)

Query Syntax	:HARDcopy:GRAYscale?
	The :HARDcopy:GRAYscale? query returns a flag indicating whether
	grayscaling is performed in the hardcopy dump.
Return Format	<gray><NL>
	<gray> ::= {0 1}
See Also	• "Introduction to :HARDcopy Commands" on page 193

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 475