Agilent Technologies 5000 Series manual MERGe

3Commands by Subsystem

:MERGe

(see page 530)

Command Syntax :MERGe <pixel memory>

<pixel memory> ::= {PMEMory0 PMEMory1 PMEMory2 PMEMory3 PMEMory4 PMEMory5 PMEMory6 PMEMory7 PMEMory8 PMEMory9}

The :MERGe command stores the contents of the active display in the specified pixel memory. The previous contents of the pixel memory are overwritten. The pixel memories are PMEMory0 through PMEMory9. This command is similar to the function of the "Save To: INTERN_<n>" key in the Save/Recall menu.

See Also • "Introduction to Root (:) Commands" on page 88

•"*SAV (Save)" on page 78

•"*RCL (Recall)" on page 74

•":VIEW" on page 122

•":BLANk" on page 94

104 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference