Agilent Technologies 5000 Series manual Return Format statusNL

Commands by Subsystem 3

Table 30 Standard Event Status Register (ESR) (continued)

Bit	Name	Description	When Set (1 = High = True), Indicates:
1	RQL	Request Control	The device is requesting control. (Not used.)
0	OPC	Operation Complete	Operation is complete.

Return Format <status><NL>

<status> ::= 0,..,255; an integer in NR1 format.

N O T E Reading the Standard Event Status Register clears it. High or 1 indicates the bit is true.

See Also • "Introduction to Common (*) Commands" on page 63

•"*ESE (Standard Event Status Enable)" on page 66

•"*OPC (Operation Complete)" on page 72

•"*CLS (Clear Status)" on page 65

•":SYSTem:ERRor" on page 297

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 69