Agilent Technologies 5000 Series manual Command Syntax View source

3Commands by Subsystem

:VIEW

(see page 530)

Command Syntax :VIEW <source>

<source> ::= {CHANnel<n> PMEMory0,..,PMEMory9 FUNCtion MATH} <n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The :VIEW command turns on the specified channel, function, or trace memory.

N O T E MATH is an alias for FUNCtion.

See Also • "Introduction to Root (:) Commands" on page 88

•":BLANk" on page 94

•":CHANnel<n>:DISPlay" on page 147

•":FUNCtion:DISPlay" on page 184

•":STATus" on page 119

Example Code ' VIEW_BLANK - (not executed in this example)

'- VIEW turns on (starts displaying) a channel or pixel memory.

'- BLANK turns off (stops displaying) a channel or pixel memory.

'myScope.WriteString ":BLANK CHANNEL1" ' Turn channel 1 off.

'myScope.WriteString ":VIEW CHANNEL1" ' Turn channel 1 on.

Example program from the start: "VISA COM Example in Visual Basic" on page 578

122 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference