Agilent Technologies 5000 Series manual TST Self Test, See Also

3Commands by Subsystem

*TST (Self Test)

	(see page 530)
Query Syntax	*TST?
	The *TST? query performs a self- test on the instrument. The result of the
	test is placed in the output queue. A zero indicates the test passed and a
	non- zero indicates the test failed. If the test fails, refer to the
	troubleshooting section of the Service Guide.
Return Format	<result><NL>
	<result> ::= 0 or non-zero value; an integer in NR1 format
See Also	• "Introduction to Common (*) Commands" on page 63

84 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference