Agilent Technologies 5000 Series manual See Also, AER Arm Event Register on

3Commands by Subsystem

Table 37 Operation Status Enable Register (OPEE) (continued)

Bit	Name	Description	When Set (1 = High = True), Enables:
3	Run	Running	Event when the oscilloscope is running (not
			stopped).
2-0	---	---	(Not used.)

Query Syntax	:OPEE?
	The :OPEE? query returns the current value contained in the Operation
	Status Enable register as an integer number.
Return Format	<value><NL>
	<value> ::= integer in NR1 format.
See Also	• "Introduction to Root (:) Commands" on page 88
	• ":AER (Arm Event Register)" on page 89
	• ":CHANnel<n>:PROTection" on page 156
	• ":EXTernal:PROTection" on page 178
	• ":OPERegister[:EVENt] (Operation Status Event Register)" on page 109
	• ":OVLenable (Overload Event Enable Register)" on page 111
	• ":OVLRegister (Overload Event Register)" on page 113
	• "*STB (Read Status Byte)" on page 81
	• "*SRE (Service Request Enable)" on page 79

106 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference