484 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
5Obsolete and Discontinued Commands
:MEASure:TSTArt
(see page 530)
Command Syntax :MEASure:TSTArt <value> [suffix]
<value> ::= time at the start marker in seconds
[suffix] ::= {s | ms | us | ns | ps}
The :MEASure:TSTArt command moves the start marker (X1 cursor) to the
specified time with respect to the trigger time.
Query Syntax :MEASure:TSTArt?
The :MEASure:TSTArt? query returns the time at the start marker (X1
cursor).
Return Format <value><NL>
<value> ::= time at the start marker in NR3 format
See Also •"Introduction to :MARKer Commands" on page 204
•"Introduction to :MEASure Commands" on page 218
•":MARKer:X1Position" on page 206
•":MARKer:X2Position" on page 208
•":MARKer:XDELta" on page 210
•":MEASure:TDELta" on page 480
•":MEASure:TSTOp" on page 485
NOTE The short form of this command, TSTA, does not follow the defined Long Form to Short
Form Truncation Rules (see page 532). The normal short form "TST" would be the same for
both TSTArt and TSTOp, so sending TST for the TSTArt command produces an error.
NOTE The :MEASure:TSTArt command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :MARKer:X1Position command (see page 206) instead.