Agilent Technologies 5000 Series manual MEASureXMAX

Commands by Subsystem 3

:MEASure:XMAX

(see page 530)

Command Syntax :MEASure:XMAX [<source>]

<source> ::= {CHANnel<n> FUNCtion MATH}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The :MEASure:XMAX command installs a screen measurement and starts an X- at- Max- Y measurement on the selected window. If the optional source parameter is specified, the current source is modified.

N O T E :MEASure:XMAX is an alias for :MEASure:TMAX.

Query Syntax :MEASure:XMAX? [<source>]

The :MEASure:XMAX? query measures and returns the horizontal axis value at which the maximum vertical value occurs. If the optional source is specified, the current source is modified. If all channels are off, the query returns 9.9E+37.

Return Format <value><NL>

<value> ::= horizontal value of the maximum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 218

•":MEASure:XMIN" on page 256

•":MEASure:TMAX" on page 482

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 255