Agilent Technologies 5000 Series manual Query Syntax *ESE?

Commands by Subsystem 3

Table 29 Standard Event Status Enable (ESE) (continued)

Bit	Name	Description	When Set (1 = High = True), Enables:
1	RQL	Request Control	Event when the device is requesting control. (Not
			used.)
0	OPC	Operation Complete	Event when an operation is complete.

Query Syntax *ESE?

The *ESE? query returns the current contents of the Standard Event Status Enable Register.

Return Format <mask_argument><NL>

<mask_argument> ::= 0,..,255; an integer in NR1 format.

See Also • "Introduction to Common (*) Commands" on page 63

•"*ESR (Standard Event Status Register)" on page 68

•"*OPC (Operation Complete)" on page 72

•"*CLS (Clear Status)" on page 65

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 67