Agilent Technologies 5000 Series :HARDcopy Commands

Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 193
:HARDcopy Commands
Set and query the selection of hardcopy device and formatting options. See
"Introduction to :HARDcopy Commands" on page 193.
Introduction to
:HARDcopy
Commands
The HARDcopy subsystem provides commands to set and query the
selection of hardcopy device and formatting options such as inclusion of
instrument settings (FACTors) and generation of formfeed (FFEed).
:HARDC is an acceptable short form for :HARDcopy.
Table 48 :HARDcopy Commands Summary
Command Query Options and Query Returns
:HARDcopy:AREA <area>
(see page 195)
:HARDcopy:AREA? (see
page 195)
<area> ::= SCReen
:HARDcopy:APRinter
<active_printer> (see
page 196)
:HARDcopy:APRinter?
(see page 196)
<active_printer> ::= {<index> |
<name>}
<index> ::= integer index of
printer in list
<name> ::= name of printer in
list
:HARDcopy:FACTors {{0
| OFF} | {1 | ON}}
(see page 197)
:HARDcopy:FACTors?
(see page 197)
{0 | 1}
:HARDcopy:FFEed {{0 |
OFF} | {1 | ON}} (see
page 198)
:HARDcopy:FFEed? (see
page 198)
{0 | 1}
:HARDcopy:INKSaver
{{0 | OFF} | {1 |
ON}} (see page 199)
:HARDcopy:INKSaver?
(see page 199)
{0 | 1}
:HARDcopy:PALette
<palette> (see
page 200)
:HARDcopy:PALette?
(see page 200)
<palette> ::= {COLor | GRAYscale
| NONE}
n/a :HARDcopy:PRinter:LIS
T? (see page 201)
<list> ::= [<printer_spec>] ...
[printer_spec>]
<printer_spec> ::=
"<index>,<active>,<name>;"
<index> ::= integer index of
printer
<active> ::= {Y | N}
<name> ::= name of printer
:HARDcopy:STARt (see
page 202)
n/a n/a