180 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:EXTernal:UNITs
(see page 530)
Command Syntax :EXTernal:UNITs <units>
<units> ::= {VOLT | AMPere}
The :EXTernal:UNITs command sets the measurement units for the probe
connected to the external trigger input. Select VOLT for a voltage probe
and select AMPere for a current probe. Measurement results, channel
sensitivity, and trigger level will reflect the measurement units you select.
Query Syntax :EXTernal:UNITs?
The :CHANnel<n>:UNITs? query returns the current units setting for the
external trigger.
Return Format <units><NL>
<units> ::= {VOLT | AMP}
See Also •"Introduction to :EXTernal Trigger Commands" on page 171
•"Introduction to :TRIGger Commands" on page 313
•":EXTernal:RANGe" on page 179
•":EXTernal:PROBe" on page 175
•":CHANnel<n>:UNITs" on page 159