Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 327
:TRIGger:CAN:PATTern:DATA:LENGth
(see page 530)
Command Syntax :TRIGger:CAN:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :TRIGger:CAN:PATTern:DATA:LENGth command sets the number of
8- bit bytes in the CAN data string. The number of bytes in the string can
be anywhere from 0 bytes to 8 bytes (64 bits). The value for these bytes is
set by the :TRIGger:CAN:PATTern:DATA command.
Query Syntax :TRIGger:CAN:PATTern:DATA:LENGth?
The :TRIGger:CAN:PATTern:DATA:LENGth? query returns the current CAN
data pattern length setting.
Return Format <count><NL>
<count> ::= integer from 1 to 8 in NR1 format
Errors •"- 241, Hardware missing" on page 501
See Also •"Introduction to :TRIGger Commands" on page 313
•":TRIGger:CAN:PATTern:DATA" on page 326
•":TRIGger:CAN:SOURce" on page 332
NOTE This command is only valid when the automotive CAN and LIN serial decode option (Option
AMS) has been licensed.