Agilent Technologies 5000 Series manual Version 4.00 at Introduction

What's New 1

Version 4.00 at Introduction

The Agilent InfiniiVision 5000 Series oscilloscopes were introduced with version 4.00 of oscilloscope operating software. The command set is similar to the 6000 Series oscilloscopes (and the 54620/54640 Series oscilloscopes before them) except that digital channels, rear- panel 10 Mhz reference BNC input/output, and serial bus triggering/decode features are not present.

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 21