Agilent Technologies 5000 Series :RECall:IMAGe[:STARt]

Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 259
:RECall:IMAGe[:STARt]
(see page 530)
Command Syntax :RECall:IMAGe[:STARt] [<file_spec>]
<file_spec> ::= {<internal_loc> | <file_name>}
<internal_loc> ::= 0-9; an integer in NR1 format
<file_name> ::= quoted ASCII string
The :RECall:IMAGe[:STARt] command recalls a trace (TIFF) image.
See Also •"Introduction to :RECall Commands" on page 257
•":RECall:FILename" on page 258
•":SAVE:IMAGe[:STARt]" on page 265
NOTE If a file extension is provided as part of a specified <file_name>, it must be ".tif".