Agilent Technologies 5000 Series manual TRIGgerIICPATTernDATA, TRIGgerIICPATTernADDRess on

Commands by Subsystem 3

:TRIGger:IIC:PATTern:DATA

	(see page 530)
Command Syntax	:TRIGger:IIC:PATTern:DATA <value>
	<value> ::= integer or <string>
	<string> ::= "0xnn" where n ::= {0,..,9 A,..,F}
	The :TRIGger:IIC:PATTern:DATA command sets IIC data. The data value
	can range from 0x00 to 0x0FF (hexadecimal). Use the don't care data
	pattern (- 1 or 0xFFFFFFFF) to ignore the data value.
Query Syntax	:TRIGger:IIC:PATTern:DATA?
	The :TRIGger:IIC:PATTern:DATA? query returns the current pattern for IIC
	data.
Return Format	<value><NL>
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:IIC:PATTern:ADDRess" on page 356
	• ":TRIGger:IIC:PATTern:DATa2" on page 358
	• ":TRIGger:IIC:TRIGger[:TYPE]" on page 362

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 357