Agilent Technologies 5000 Series manual TRIGgerSPISOURceFRAMe, TRIGgerSPIFRAMing on

3Commands by Subsystem

:TRIGger:SPI:SOURce:FRAMe

(see page 530)

Command Syntax :TRIGger:SPI:SOURce:FRAMe <source>

<source> ::= {CHANnel<n> EXTernal} for the DSO models

<source> ::= {CHANnel<n> DIGital0,..,DIGital15} for the MSO models <n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

	The :TRIGger:SPI:SOURce:FRAMe command sets the frame source when
	:TRIGger:SPI:FRAMing is set to CHIPselect or NOTChipselect.
Query Syntax	:TRIGger:SPI:SOURce:FRAMe?
	The :TRIGger:SPI:SOURce:FRAMe? query returns the current frame source
	for the SPI serial frame.
Return Format	<source><NL>
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:SPI:SOURce:CLOCk" on page 378
	• ":TRIGger:SPI:SOURce:DATA" on page 379
	• ":TRIGger:SPI:FRAMing" on page 375

380 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference