Agilent Technologies 5000 Series manual WAVeformYORigin

3Commands by Subsystem

:WAVeform:YORigin

(see page 530)

Query Syntax :WAVeform:YORigin?

The :WAVeform:YORigin? query returns the y- origin value for the currently specified source. This value is the Y- axis value of the data value specified by the :WAVeform:YREFerence value. For this product, this is the Y- axis value of the center of the screen.

Return Format <value><NL>

<value> ::= y-origin in the current preamble in 32-bit floating point NR3 format

See Also • "Introduction to :WAVeform Commands" on page 403

•":WAVeform:PREamble" on page 417

•":WAVeform:YREFerence" on page 433

Example Code • "Example Code" on page 418

432 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference