Agilent Technologies 5000 Series manual AUToscaleCHANnels, View on BLANk on

Commands by Subsystem 3

:AUToscale:CHANnels

(see page 530)

Command Syntax :AUToscale:CHANnels <value>

<value> ::= {ALL DISPlayed}

The :AUTOscale:CHANnels command specifies which channels will be displayed on subsequent :AUToscales.

•When ALL is selected, all channels that meet the requirements of :AUToscale will be displayed.

•When DISPlayed is selected, only the channels that are turned on are autoscaled.

Use the :VIEW or :BLANk root commands to turn channels on or off.

Query Syntax :AUToscale:CHANnels?

The :AUToscale:CHANnels? query returns the autoscale channels setting.

Return Format <value><NL>

<value> ::= {ALL DISP}

See Also • "Introduction to Root (:) Commands" on page 88

•":AUToscale" on page 90

•":AUToscale:AMODE" on page 92

•":VIEW" on page 122

•":BLANk" on page 94

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 93