Agilent Technologies 5000 Series manual ESE Standard Event Status Enable

3Commands by Subsystem

*ESE (Standard Event Status Enable)

(see page 530)

Command Syntax *ESE <mask_argument>

<mask_argument> ::= integer from 0 to 255

The *ESE common command sets the bits in the Standard Event Status Enable Register. The Standard Event Status Enable Register contains a mask value for the bits to be enabled in the Standard Event Status Register. A "1" in the Standard Event Status Enable Register enables the corresponding bit in the Standard Event Status Register. A zero disables the bit.

321 854 &0( (;( ''( 4<( 54/ 23& (65"

       

(6( (6("

25

7R(6%ELWLQ 6WDWXV%\WH

5HJLVWHU

6WDQGDUG(YHQW 6WDWXV5HJLVWHU

6WDQGDUG(YHQW 6WDWXV(QDEOH 0DVN5HJLVWHU

Table 29 Standard Event Status Enable (ESE)

Bit	Name	Description	When Set (1 = High = True), Enables:
7	PON	Power On	Event when an OFF to ON transition occurs.
6	URQ	User Request	Event when a front-panel key is pressed.
5	CME	Command Error	Event when a command error is detected.
4	EXE	Execution Error	Event when an execution error is detected.
3	DDE	Device Dependent Error	Event when a device-dependent error is detected.
2	QYE	Query Error	Event when a query error is detected.

66 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference