Agilent Technologies 5000 Series manual None

2Commands Quick Reference

Table 12 :MEASure Commands Summary (continued)

Command	Query	Options and Query Returns
:MEASure:SDEViation	:MEASure:SDEViation?	<source> ::= {CHANnel<n>
[<source>] (see	[<source>] (see	FUNCtion MATH}
page 238)	page 238)	<n> ::= 1-2 or 1-4 in NR1 format
		<return_value> ::= calculated
		std deviation in NR3 format
:MEASure:SHOW {1	:MEASure:SHOW? (see	{1}
ON} (see page 239)	page 239)
:MEASure:SOURce	:MEASure:SOURce? (see	<source1,2> ::= {CHANnel<n>
[<source1>]	page 240)	FUNCtion MATH}
[,<source2>] (see		<n> ::= 1-2 or 1-4 in NR1 format
page 240)		<return_value> ::= {<source>
		NONE}
n/a	:MEASure:TEDGe?	<slope> ::= direction of the
	<slope><occurrence>[,	waveform
	<source>] (see	<occurrence> ::= the transition
	page 242)	to be reported
		<source> ::= {CHANnel<n>
		FUNCtion MATH}
		<n> ::= 1-2 or 1-4 in NR1 format
		<return_value> ::= time in
		seconds of the specified
		transition
n/a	:MEASure:TVALue?	<value> ::= voltage level that
	<value>,	the waveform must cross.
	[<slope>]<occurrence>	<slope> ::= direction of the
	[,<source>] (see	waveform when <value> is crossed.
	page 244)	<occurrence> ::= transitions
		reported.
		<return_value> ::= time in
		seconds of specified voltage
		crossing in NR3 format
		<source> ::= {CHANnel<n>
		FUNCtion MATH}
		<n> ::= 1-2 or 1-4 in NR1 format
:MEASure:VAMPlitude	:MEASure:VAMPlitude?	<source> ::= {CHANnel<n>
[<source>] (see	[<source>] (see	FUNCtion MATH}
page 246)	page 246)	<n> ::= 1-2 or 1-4 in NR1 format
		<return_value> ::= the amplitude
		of the selected waveform in volts
		in NR3 format

38 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference