Agilent Technologies 5000 Series manual PRINt

Commands by Subsystem 3

:PRINt

(see page 530)

Command Syntax :PRINt [<options>]

<options> ::= [<print option>][,..,<print option>]

<print option> ::= {COLor GRAYscale PRINter0 BMP8bit BMP PNG NOFactors FACTors}

The <print option> parameter may be repeated up to 5 times.

The PRINt command formats the output according to the currently selected format (device). If an option is not specified, the value selected in the Print Config menu is used. Refer to ":HARDcopy:FORMat" on page 474 for more information.

See Also • "Introduction to Root (:) Commands" on page 88

•"Introduction to :HARDcopy Commands" on page 193

•":HARDcopy:FORMat" on page 474

•":HARDcopy:FACTors" on page 197

•":HARDcopy:GRAYscale" on page 475

•":DISPlay:DATA" on page 164

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 115