Obsolete and Discontinued Commands 5

:CHANnel<n>:PMODe

(see page 530)

Command Syntax :CHANnel<n>:PMODe <pmode value> <pmode value> ::= {AUTo MANual}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The probe sense mode is controlled internally and cannot be set. If a probe with sense is connected to the specified channel, auto sensing is enabled; otherwise, the mode is manual.

If the PMODe sent matches the oscilloscope's setting, the command will be accepted. Otherwise, a setting conflict error is generated.

N O T E

The :CHANnel<n>:PMODe command is an obsolete command provided for compatibility to

previous oscilloscopes.

 

Query Syntax :CHANnel<n>:PMODe?

The :CHANnel<n>:PMODe? query returns AUT if an autosense probe is attached and MAN otherwise.

Return Format <pmode value><NL>

<pmode value> ::= {AUT MAN}

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference

465

Page 465
Image 465
Agilent Technologies 5000 Series manual CHANnelnPMODe, Previous oscilloscopes