488 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
5Obsolete and Discontinued Commands
:MEASure:UPPer
(see page 530)
Command Syntax :MEASure:UPPer <value>
The :MEASure:UPPer command sets the upper measurement threshold
value. This value and the LOWer value represent absolute values when the
thresholds are ABSolute and percentage when the thresholds are PERCent
as defined by the :MEASure:DEFine THResholds command.
Query Syntax :MEASure:UPPer?
The :MEASure:UPPer? query returns the current upper threshold level.
Return Format <value><NL>
<value> ::= the user-defined upper threshold in NR3 format
See Also •"Introduction to :MEASure Commands" on page 218
•":MEASure:LOWer" on page 478
•":MEASure:THResholds" on page 481
NOTE The :MEASure:UPPer command is obsolete and is provided for backward compatibility to
previous oscilloscopes. Use the :MEASure:DEFine THResholds command (see page 222)
instead.