Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 197
:HARDcopy:FACTors
(see page 530)
Command Syntax :HARDcopy:FACTors <factors>
<factors> ::= {{OFF | 0} | {ON | 1}}
The HARDcopy:FACTors command controls whether the scale factors are
output on the hardcopy dump.
Query Syntax :HARDcopy:FACTors?
The :HARDcopy:FACTors? query returns a flag indicating whether
oscilloscope instrument settings are output on the hardcopy.
Return Format <factors><NL>
<factors> ::= {0 | 1}
See Also •"Introduction to :HARDcopy Commands" on page 193
•":HARDcopy:STARt" on page 202
•":HARDcopy:FFEed" on page 198
•":HARDcopy:INKSaver" on page 199
•":HARDcopy:PALette" on page 200