Agilent Technologies 5000 Series BLANk, On/off a channel, etc, Math is an alias for FUNCtion

3Commands by Subsystem

:BLANk

(see page 530)

Command Syntax :BLANk [<source>]

	<source> ::= {CHANnel<n> FUNCtion MATH}
	<n> ::= {1 2 3 4} for the four channel oscilloscope models
	<n> ::= {1 2} for the two channel oscilloscope models
	The :BLANk command turns off (stops displaying) the specified channel or
	math function. The :BLANk command with no parameter turns off all
	sources.
	To turn on (start displaying) a channel, etc., use the :VIEW command. The DISPlay
N O T E
	commands, :CHANnel<n>:DISPlay or :FUNCtion:DISPlay are the preferred method to turn
	on/off a channel, etc.
	MATH is an alias for FUNCtion.
N O T E

See Also • "Introduction to Root (:) Commands" on page 88

•":CDISplay" on page 95

•":CHANnel<n>:DISPlay" on page 147

•":FUNCtion:DISPlay" on page 184

•":STATus" on page 119

•":VIEW" on page 122

Example Code • "Example Code" on page 122

94 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference