Agilent Technologies 5000 Series manual TRIGgerSPIFRAMing, Return Format valueNL

Commands by Subsystem 3

:TRIGger:SPI:FRAMing

(see page 530)

Command Syntax :TRIGger:SPI:FRAMing <value>

<value> ::= {CHIPselect NOTChipselect TIMeout}

The :TRIGger:SPI:FRAMing command sets the SPI trigger framing value. If TIMeout is selected, the timeout value is set by the :TRIGger:SPI:CLOCk:TIMeout command.

Query Syntax :TRIGger:SPI:FRAMing?

The :TRIGger:SPI:FRAMing? query returns the current SPI framing value.

Return Format <value><NL>

<value> ::= {CHIPselect NOTChipselect TIMeout}

See Also • "Introduction to :TRIGger Commands" on page 313

•":TRIGger:MODE" on page 319

•":TRIGger:SPI:CLOCk:TIMeout" on page 374

•":TRIGger:SPI:SOURce:FRAMe" on page 380

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 375