Agilent Technologies 5000 Series manual RST Reset, Command Syntax *RST

Commands by Subsystem 3

*RST (Reset)

(see page 530)

Command Syntax *RST

The *RST command places the instrument in a known state. Reset conditions are:

Acquire Menu

Mode	Normal
Realtime	On
Averaging	Off
# Averages	8
Analog Channel Menu
Channel 1	On
Channel 2	Off
Volts/division	5.00 V
Offset	0.00
Coupling	DC
Probe attenuation	AutoProbe (if AutoProbe is connected),
	otherwise 1.0:1
Vernier	Off
Invert	Off
BW limit	Off
Impedance	1 M Ohm
Units	Volts
Skew	0
Cursor Menu
Source	Channel 1

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 75