Agilent Technologies 5000 Series manual ACQuireDAALias, Introduction to ACQuire Commands on

3Commands by Subsystem

:ACQuire:DAALias

	(see page 530)
Command Syntax	:ACQuire:DAALias <mode>
	<mode> ::= {DISable AUTO}
	The :ACQuire:DAALias command sets the disable anti- alias mode of the
	oscilloscope.
	When set to DISable, anti- alias is always disabled. This is good for cases
	where dithered data is not desired.
	When set to AUTO, the oscilloscope turns off anti- alias control as needed.
	Such cases are when the FFT or differentiate math functions are silent.
	The :DIGitize command always turns off the anti- alias control as well.
Query Syntax	:ACQuire:DAALias?
	The :ACQuire:DAALias? query returns the oscilloscope's current disable
	anti- alias mode setting.
Return Format	<mode><NL>
	<mode> ::= {DIS AUTO}
See Also	• "Introduction to :ACQuire Commands" on page 123
	• ":ACQuire:AALias" on page 125

128 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference