Agilent Technologies 5000 Series manual CALibrateSWITch, See Also

Commands by Subsystem 3

:CALibrate:SWITch

	(see page 530)
Query Syntax	:CALibrate:SWITch?
	The :CALibrate:SWITch? query returns the rear- panel calibration protect
	(CAL PROTECT) switch state. The value PROTected indicates calibration is
	disabled, and UNPRotected indicates calibration is enabled.
Return Format	<switch><NL>
	<switch> ::= {PROT UNPR}
See Also	• "Introduction to :CALibrate Commands" on page 134

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 139