Agilent Technologies 5000 Series manual HARDcopyDESTination

Obsolete and Discontinued Commands 5

:HARDcopy:DESTination

(see page 530)

Command Syntax :HARDcopy:DESTination <destination>

<destination> ::= {CENTronics FLOPpy}

The :HARDcopy:DESTination command sets the hardcopy destination.

N O T E	The :HARDcopy:DESTination command is an obsolete command provided for compatibility
	to previous oscilloscopes. Use the :HARDcopy:FILename command (see page 473) instead.

Query Syntax :HARDcopy:DESTination?

The :HARDcopy:DESTination? query returns the selected hardcopy destination.

Return Format <destination><NL>

<destination> ::= {CENT FLOP}

See Also • "Introduction to :HARDcopy Commands" on page 193

•":HARDcopy:FORMat" on page 474

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 471