Philips P406TAT, MA4CMH20MRE, E4PIN Important notes for operation, Navigation in the screen menu

STANDBY/ON y

2. Important notes for operation

Switching on

You can switch on the video recorder with the

STANDBY/ON y button.

Automatic switch-off

If the video recorder is not used for several minutes, it switches itself off automatically. This function can be deactivated (e.g. if you want to use the video recorder as a TV receiver). For more information, please read the section 'Automatic switch-off' in chapter 'Other functions'.

Time in the display

If you have switched the video recorder off with , the time will show in the

display, e.g. '18:00'.

If the clock has not been set, ' --:-- ' will appear.

Power consumption

The video recorder should always be connected to the mains so as not to affect the use of the TV or programmed recordings.

Your video recorder uses less than 4W.

Power outage/no power

Channel information remains saved for up to 10 year, the time and timer information is saved for up to 1 minute.

Navigation in the screen menu

You can check/change many functions and set- tings of your video recorder via the on-screen menu. The individual functions are selected, via the remote control as follows:

Call up the menu: with		MENU		.
To select: with			.To enter or change
	K B	L C

your selection: with the number buttons 0..9 or with K B L C .

To save or confirm: with B 1 .

To cancel: with CLEAR .

To end: with STATUS/EXIT .

SELECT K L CHOOSE B

→TIMER RECORD SET UP VCR SET UP TUNER SET UP INITIAL SET UP

END=EXIT

The symbols on your video recorder display

PWR. REC

These symbols can light up on your video recorder display:

PWR When you keep your video recorder on.

When you have put a cassette in the video recorder.

Display of programme number of the TV channel / time / RF channel.

REC When you record.

When you have programmed a recording.

6 EN