Philips MA4CMH20MRE, E4PIN Setting the clock, Setting the RF out channel, What is RF out channel?

7.Press

2.Press

Setting the clock

If the display shows an incorrect time or ' --:-- ', the time and date must be reset manually.

If a TV channel that transmits TXT/PDC (tele- text/PDC) is stored under programme number 'P01', time/date will automatically be taken from the TXT/PDC information.

(SMART CLOCK)

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'INITIAL SET UP' with							K B		L C	and
confirm with				.
			B 1
4.Select 'CLOCK' with								and confirm
					K B	L C
with		.
	B 1
			TIME --:--
		DATE --/--/--
		SMART CLOCK [ON]
	END=EXIT

5.Check the time in 'TIME'. If required, please change the time with 0..9 .

6.Check 'DAY', 'MONTH' and 'YEAR' in the same way.

7.Choose ‘SMART CLOCK’ ON or OFF with

B 1 .

8.To end, press STATUS/EXIT .

Time/date is displayed incorrectly despite manual setting

*With Smart Clock, time/date is taken from the TV channel saved on 'P01'.

If you wish to switch this automatic time correc- tion off, select 'OFF' for Smart Clock. You can reactivate this function at anytime by selecting 'ON' for Smart Clock.

Setting the RF out channel

In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the video recorder.

Result: As soon as the video recorder is switched on, the reception quality for this or sev- eral other TV channels will decrease.

The following steps will show you how to change the pre-set 'transmission' (RF out channel) fre- quency on the video recorder.

What is RF out channel?

This electronic component in the video recorder allows the device to transmit audio and video signals via the aerial cable. These signals can be received on a TV set just like TV channels. This frequency or channel indicates the channel on which the audio or video signal is transmit- ted.

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

MENU . The main menu will appear.

3.Select 'INITIAL SET UP' with K B L C and

confirm with

B 1

.

4.Select 'RF OUT' with

and confirm

K B

L C

with

.

B 1

SELECT K L CHOOSE B

→RF OUT CH

35

END=EXIT

5.Press

.

B 1

6.Press

or

to select the channel

K B

L C

0..9

which is not broadcasted between channel 22 and channel 69 in your area.

B 1 . When you want to receive TV signals directly from the VHF/UHF TV aerial, select the channel 22 first. Then, press L C

and confirm with B 1 .

8.To end, press STATUS/EXIT .

10 EN