Agilent Technologies 5000 Series TIMebaseVERNier, See Also Introduction to TIMebase Commands on

Commands by Subsystem 3

:TIMebase:VERNier

(see page 530)

Command Syntax :TIMebase:VERNier <vernier value>

<vernier value> ::= {{1 ON} {0 OFF}

The :TIMebase:VERNier command specifies whether the time base control's vernier (fine horizontal adjustment) setting is ON (1) or OFF (0).

Query Syntax :TIMebase:VERNier?

The :TIMebase:VERNier? query returns the current state of the time base control's vernier setting.

Return Format <vernier value><NL>

<vernier value> ::= {0 1}

See Also • "Introduction to :TIMebase Commands" on page 302

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 309