Agilent Technologies 5000 Series manual TRIGgerIICTRIGgerTYPE, Query Syntax

3Commands by Subsystem

:TRIGger:IIC:TRIGger[:TYPE]

(see page 530)

Command Syntax :TRIGger:IIC:TRIGger[:TYPE] <value>

<value> ::= {STARt STOP READ7 READEprom WRITe7 WRITe10 NACKnowledge ANACknowledge R7Data2 W7Data2 RESTart}

The :TRIGger:IIC:TRIGger[:TYPE] command sets the IIC trigger type:

•STARt — Start condition.

•STOP — Stop condition.

•READ7 — 7- bit address frame containing (Start:Address7:Read:Ack:Data). The value READ is also accepted for READ7.

•R7Data2 — 7- bit address frame containing (Start:Address7:Read:Ack:Data:Ack:Data2).

•READEprom — EEPROM data read.

•WRITe7 — 7- bit address frame containing (Start:Address7:Write:Ack:Data). The value WRITe is also accepted for WRITe7.

•W7Data2 — 7- bit address frame containing (Start:Address7:Write:Ack:Data:Ack:Data2).

•WRITe10 — 10- bit address frame containing (Start:Address byte1:Write:Ack:Address byte 2:Data).

•NACKnowledge — Missing acknowledge.

•ANACknowledge — Address with no acknowledge.

•RESTart — Another start condition occurs before a stop condition.

N O T E	The short form of READ7 (READ7), READEprom (READE), WRITe7 (WRIT7), and WRITe10
	(WRIT10) do not follow the defined Long Form to Short Form Truncation Rules (see
	page 532).
Query Syntax	:TRIGger:IIC:TRIGger[:TYPE]?
	The :TRIGger:IIC:TRIGger[:TYPE]? query returns the current IIC trigger
	type value.
Return Format	<value><NL>
	<value> ::= {STAR STOP READ7 READE WRIT7 WRIT10 NACK ANAC
	R7D2 W7D2 REST}
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:MODE" on page 319

362 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference