Agilent Technologies 5000 Series *RCL (Recall)

74 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
*RCL (Recall)
(see page 530)
Command Syntax *RCL <value>
<value> ::= {0|1|2|3|4|5|6|7|8|9}
The *RCL command restores the state of the instrument from the specified
save/recall register.
See Also •"Introduction to Common (*) Commands" on page 63
•"*SAV (Save)" on page 78