264 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:SAVE:FILename
(see page 530)
Command Syntax :SAVE:FILename <base_name>
<base_name> ::= quoted ASCII string
The :SAVE:FILename command specifies the source for any SAVE
operations.
Query Syntax :SAVE:FILename?
The :SAVE:FILename? query returns the current SAVE filename.
Return Format <base_name><NL>
<base_name> ::= quoted ASCII string
See Also •"Introduction to :SAVE Commands" on page 263
•":SAVE:IMAGe[:STARt]" on page 265
•":SAVE:SETup[:STARt]" on page 272
•":SAVE:WAVeform[:STARt]" on page 273
•":SAVE:PWD" on page 271
•":RECall:FILename" on page 258
NOTE This command specifies a file's base name only, without path information or an extension.