378 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:TRIGger:SPI:SOURce:CLOCk
(see page 530)
Command Syntax :TRIGger:SPI:SOURce:CLOCk <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:SPI:SOURce:CLOCk command sets the source for the SPI
serial clock.
Query Syntax :TRIGger:SPI:SOURce:CLOCk?
The :TRIGger:SPI:SOURce:CLOCk? query returns the current source for the
SPI serial clock.
Return Format <source><NL>
See Also •"Introduction to :TRIGger Commands" on page 313
•":TRIGger:SPI:CLOCk:SLOPe" on page 373
•":TRIGger:SPI:CLOCk:TIMeout" on page 374
•":TRIGger:SPI:SOURce:FRAMe" on page 380
•":TRIGger:SPI:SOURce:DATA" on page 379