Agilent Technologies 5000 Series :SBUS:SPI:WIDTh

Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 287
:SBUS:SPI:WIDTh
(see page 530)
Command Syntax :SBUS:SPI:WIDTh <word_width>
<word_width> ::= integer 4-16 in NR1 format
The :SBUS:SPI:WIDTh command determines the number of bits in a word
of data for SPI.
Query Syntax :SBUS:SPI:WIDTh?
The :SBUS:SPI:WIDTh? query returns the current SPI decode word width.
Return Format <word_width><NL>
<word_width> ::= integer 4-16 in NR1 format
Errors •"- 241, Hardware missing" on page 501
See Also •"Introduction to :SBUS Commands" on page 277
•":SBUS:MODE" on page 286
•":TRIGger:SPI Commands" on page 372
NOTE This command is only valid on 4 (analog) channel oscilloscope models when the low-speed
IIC and SPI serial decode option (Option LSS) has been licensed.