Agilent Technologies 5000 Series manual WAVeformXREFerence

3Commands by Subsystem

:WAVeform:XREFerence

(see page 530)

Query Syntax :WAVeform:XREFerence?

The :WAVeform:XREFerence? query returns the x- reference value for the currently specified source. This value specifies the index of the data point associated with the x- origin data value. In this product, the x- reference point is the first point displayed and XREFerence is always 0.

Return Format <value><NL>

<value> ::= x-reference value = 0 in 32-bit NR1 format

See Also • "Introduction to :WAVeform Commands" on page 403

•":WAVeform:PREamble" on page 417

•":WAVeform:XORigin" on page 429

Example Code • "Example Code" on page 418

430 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference