Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 427
:WAVeform:VIEW
(see page 530)
Command Syntax :WAVeform:VIEW <view>
<view> ::= {MAIN}
The :WAVeform:VIEW command sets the view setting associated with the
currently selected waveform. Currently, the only legal value for the view
setting is MAIN.
Query Syntax :WAVeform:VIEW?
The :WAVeform:VIEW? query returns the view setting associated with the
currently selected waveform.
Return Format <view><NL>
<view> ::= {MAIN}
See Also •"Introduction to :WAVeform Commands" on page 403
•":WAVeform:POINts" on page 413