Agilent Technologies 5000 Series manual SBUSDISPlay, Command Syntax

Commands by Subsystem 3

:SBUS:DISPlay

Command Syntax

N O T E

(see page 530)

:SBUS:DISPlay <display>

<display> ::= {{1 ON} {0 OFF}}

The :SBUS:DISPlay command turns displaying of the serial decode bus on or off.

This command is only valid on 4 (analog) channel oscilloscope models when a serial decode option has been licensed.

Query Syntax	:SBUS:DISPlay?
	The :SBUS:DISPlay? query returns the current display setting of the serial
	decode bus.
Return Format	<display><NL>
	<display> ::= {0 1}
Errors	• "- 241, Hardware missing" on page 501
See Also	• "Introduction to :SBUS Commands" on page 277
	• ":CHANnel<n>:DISPlay" on page 147
	• ":VIEW" on page 122
	• ":BLANk" on page 94
	• ":STATus" on page 119

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 283